Dr. Michael O'Toole,
Our Original Molded Foot Support Device can be personalized to fit any patient's foot in just seconds, with or without a podiatrists assistance! Simply dip in hot water and fit to your patient's foot. It's that simple. The rounded foot form walls of the Miracle Foot Support molds the foot in a normal position as well as preventing spreading. The foot is held in a natural position to cushion heel, arch, instep and metatarsal joints. Our device prevents heel roll, and provides better posture while providing better weight distribution.
Cal Foot Orthotics' Molded Orthotic Devices save valuable time and improve patient care. Provide better patient care with our Original Molded Foot Support device; it's been proven extremely effective with most athletic applications.
Patient Foot Care Simplified:
|Immerse our orthotic device in boiling water for 15 seconds|
|Allow to cool until comfortable to the touch. (Approximately 30 seconds)|
|Place the orthotic device in position beneath the foot, then using your fingers and the heel of your hand; podiatrists can mold the device to the contours of the patients' foot, paying particular attention to the longitudinal and metatarsal arch areas.|
|When the orthotic device has cooled to room temperature, it is then ready to be placed in the patients shoe and worn.|
|If the device becomes uncomfortable, dip only the troublesome portion in boiling water and repeat manipulation by hand.|
|When reheated, the device will return to its original shape and can be remolded.|
|Our orthotic device may also be used as a basic shell which can be altered, extended or imposed upon as needed. Leather, cork or foam rubber may be added by using barge cement.|